Got my epoxy delivered today from U.S. Composites. I had heard I may have trouble with the shipping, but this seems not to be the case. I am a few sheets of foam board away from the entire hull..... I know I'm pretty pumped.
Friday, July 13, 2012
Freshness
Bear with me....
Today is a new day. We should rise to meet the day with optimism for the future, concern for our troubles, and a nostalgia for the past. Whatever has come before is merely the setting for the greatness we are poised to achieve.
That being said, there is a part missing: Get to work.
I have been noodling the parts left and last night I was graced with good conversation which clarified my mind. As I said, everyone needs a muse, and mine has left me with clarity. I need to work faster.
Yesterday, also, I received my carbon fiber.
So, after my thinking and so on, I have what I need to finish the mechanics. Also, I am going to get the foam and begin sculpting my hull. I did some math last night (I can literally hear people the world over cringe, and Mr. Garst- my friend and high school math teacher and a pretty good golfer- just sat up with a feeling of dread) and I should be prepared for what I am about to make as far as materials. I want to shout out to Soller Composites for the great prices and timely delivery. I will throw more business their way.
As always, I will keep you informed of my progress.
Let's go.
Tuesday, July 10, 2012
Primary Run
So there is the final gear-box assembly with the prop. I haven't got the crank assembly done quite yet (I did, but it failed on me in the test), but a bit of welding will have it done shortly. Also, that is a stand-in flywheel pinned to the center shaft. The real flywheel will be bigger and heavier.
What do you think of that?
on and on
So last night I worked into the dark hours, and I got stuff done. Mostly I made up for what went wrong over the weekend. The parts I couldn't get to braze became pressed parts. The broken universal is repaired. Now, I will do a little clean-up on some of the details and assemble with the intent to run.
I can't really work past ten due to work schedule, so I will have to work quickly. And this brings up a lesson I keep relearning: you can go faster if you slow down.
We have all heard the old adage: haste makes waste. Well, that is true. Last night my friend and former teacher in design told me his take (he couldn't remember where he heard it): We are in a hurry, we must go slow. And today, Dave, my friend and mentor related what a boss of his once told him when he was younger: you can go a lot faster if you would slow down.
Truth, all of it.
When I get frustrated I rush. When I rush I risk poor quality. And that can ruin a job. I am fortunate that the parts broke here. But had I gotten away with it and finished building without the knowledge of what I had done, I would have been screwed when I ran the boat. So, I got the parts made properly because I had to go back. It's a good lesson.
A NOTE ON COMMENTS
I will no longer allow anonymous comments on the blog. It's easy enough to sign in and comment, but even if you don't want to do that, you could sign what you say. I love hearing from people who are following the story, but it carries no meaning if there is no identity. So, that is the new policy.
I can't really work past ten due to work schedule, so I will have to work quickly. And this brings up a lesson I keep relearning: you can go faster if you slow down.
We have all heard the old adage: haste makes waste. Well, that is true. Last night my friend and former teacher in design told me his take (he couldn't remember where he heard it): We are in a hurry, we must go slow. And today, Dave, my friend and mentor related what a boss of his once told him when he was younger: you can go a lot faster if you would slow down.
Truth, all of it.
When I get frustrated I rush. When I rush I risk poor quality. And that can ruin a job. I am fortunate that the parts broke here. But had I gotten away with it and finished building without the knowledge of what I had done, I would have been screwed when I ran the boat. So, I got the parts made properly because I had to go back. It's a good lesson.
A NOTE ON COMMENTS
I will no longer allow anonymous comments on the blog. It's easy enough to sign in and comment, but even if you don't want to do that, you could sign what you say. I love hearing from people who are following the story, but it carries no meaning if there is no identity. So, that is the new policy.
| “What you are to do without me I cannot imagine.” ― George Bernard Shaw, Pygmalion |
Monday, July 9, 2012
Falling flat
Well, as you can see there is no video of everything working. If you are asking why, I will simply answer that I faced some serious problems, and had some fairly awesome destruction of parts. It would be easier if I just listed all the problems, but they are not important. The reality is more vague and amounts to what we face when we 'make'. Not everything works as planned.
Some of my problems were due to my own exhaustion. I sometimes get tired and forget a step or try to skip some prep work, but there are no real short cuts in the build. It will come out, and often it ends up taking more time than it would have going at it in the proper order. I know this, but ten hours of building and figuring and struggling will tend to make for bad work.
The importance is in my response: I proceed wiser and as determined as before.
"We can fight without ever winning,
but never really win without a fight."
- Rush
Some of my problems were due to my own exhaustion. I sometimes get tired and forget a step or try to skip some prep work, but there are no real short cuts in the build. It will come out, and often it ends up taking more time than it would have going at it in the proper order. I know this, but ten hours of building and figuring and struggling will tend to make for bad work.
The importance is in my response: I proceed wiser and as determined as before.
"We can fight without ever winning,
but never really win without a fight."
- Rush
Saturday, July 7, 2012
On we go
I took two days off for the holiday.
Wait.
My brother came down from Canada and I travelled back to the Armadillo Works to see him and the family for the fourth. So I lost two days. But then, I got back to work. I spent a night working over the drawings of the gear box after a few hours on the phone with an angel. And while that may not seem important or productive, I will say this: everyone needs a muse. And it is always important to clarify what you are going to make before you pick up your tools.
I got some more assistance from Ryan Slebos. That is invaluable. He was able to listen to my ideas and evaluate what I would need to get it done.
Not to go too far into design philosophy, but when we build, we are asking materials to do something. Sometimes it wants to. Sometimes, it won't cooperate. The thing you really need is an understanding of the material so you can understand what it wants to do. A brick, for example, will not cantilever. It wants to arch, but it's not going to cantilever. In this case, I am asking foam and carbon to be a boat, and while I know they will, I needed to understand how much I would need and what I would be facing. Ryan was the guy to ask. In addition, he was able to get me a better supplier and that will save me some money.
I think I owe him a beer... after the race of course.

Today, I laid out the gear box and got to check all of my parts. The cool thing about that: they worked.

On the left you can see the input side. The lower gear is the drive gear that I will be powering. The upper gear is a free-wheel that will drive the flywheel. The shaft is a precision stainless shaft, and I have yet to cut it down because I wanted the length to help with the alignment of the bearings.
On the right, you can see the output. The top gear is driven by the flywheel and drops to the final drive shaft. With a few small alterations, all of the parts will line up and I anticipate being able to post a video of it all working tomorrow. The flywheel is not done, but it doesn't require alignment and I can work without it.
If this all wraps up as expected, the hull construction will begin next week.
Wait.
My brother came down from Canada and I travelled back to the Armadillo Works to see him and the family for the fourth. So I lost two days. But then, I got back to work. I spent a night working over the drawings of the gear box after a few hours on the phone with an angel. And while that may not seem important or productive, I will say this: everyone needs a muse. And it is always important to clarify what you are going to make before you pick up your tools.
I got some more assistance from Ryan Slebos. That is invaluable. He was able to listen to my ideas and evaluate what I would need to get it done.
Not to go too far into design philosophy, but when we build, we are asking materials to do something. Sometimes it wants to. Sometimes, it won't cooperate. The thing you really need is an understanding of the material so you can understand what it wants to do. A brick, for example, will not cantilever. It wants to arch, but it's not going to cantilever. In this case, I am asking foam and carbon to be a boat, and while I know they will, I needed to understand how much I would need and what I would be facing. Ryan was the guy to ask. In addition, he was able to get me a better supplier and that will save me some money.
I think I owe him a beer... after the race of course.
Today, I laid out the gear box and got to check all of my parts. The cool thing about that: they worked.
On the right, you can see the output. The top gear is driven by the flywheel and drops to the final drive shaft. With a few small alterations, all of the parts will line up and I anticipate being able to post a video of it all working tomorrow. The flywheel is not done, but it doesn't require alignment and I can work without it.
If this all wraps up as expected, the hull construction will begin next week.
Monday, July 2, 2012
The home stretch
I'm down to it now.
Only 29 days remain between me and the race.
There is no boat, but it's coming.
This is one of the collars which will link the gears- donated from a crappy Huffy that someone found in the alley- to the the various shafts. This one is for the main input gear that I am using to drive the flywheel.
This is the final drive gear fitted to the drive shaft. Note the prop in the background.
This was taken this morning after a weekend of failure to make the huffy frame work.
The ID of this pipe is too small, so I turned it into a clamp and then used another section of the same pipe to create the vertical support.
This is me on the mill cutting a notch so that I can miter the two pipes together.
Here you can see the clamp I made and the vertical pipe which has been brazed on with silver. I haven't cleaned them, so they are looking pretty rough, but they should work.
So, here is the schedule as I see it.
I need to buy the material to make the hull. This means foam board, kevlar or glass (let's see what I can afford), and some epoxy resin.
I need to build the gear box, but I have a really good plan for that and anticipate it going pretty easy.
I need prop blades, but again I have the material and should be able to bang that out in a night.
My friend The Iron Goat will be building the flywheel (he can cast metal and turn things on his lathe) so I will need to collect that and then balance and install it.
I need a seat and some controls. I have some ideas on the seat, but the controls are still a mystery until I have the hull.
Same for the out-riggers, though I know what they are and what they are made of.
I need to build the hull, which will take three days, maybe less if I can get the Meers-Cat to lend a hand. So, all of this considered, I think I am more than a week away. I could easily take 14 days. That gives me a little less than two weeks to learn how to drive this thing.
That is a lot.
I will try to keep this blog updated. Don't take this personally, but I will be keeping it posted to keep myself going. I find that at the end of a day- after I have worked and then worked again on Fenrir- it is helpful to crystalize my thoughts in print. I am, of course, glad that people are watching the progress, but I am doing it for me. The story itself drives much of my action, so if I want this to be a story of triumph, I will need to keep on it.
Stick with me, friends, and I will make you all proud.
The target remains, the challenge is issued, and forward I go.
Only 29 days remain between me and the race.
There is no boat, but it's coming.
This is one of the collars which will link the gears- donated from a crappy Huffy that someone found in the alley- to the the various shafts. This one is for the main input gear that I am using to drive the flywheel.
This is the final drive gear fitted to the drive shaft. Note the prop in the background.
This was taken this morning after a weekend of failure to make the huffy frame work.
The ID of this pipe is too small, so I turned it into a clamp and then used another section of the same pipe to create the vertical support.
This is me on the mill cutting a notch so that I can miter the two pipes together.
Here you can see the clamp I made and the vertical pipe which has been brazed on with silver. I haven't cleaned them, so they are looking pretty rough, but they should work.
So, here is the schedule as I see it.
I need to buy the material to make the hull. This means foam board, kevlar or glass (let's see what I can afford), and some epoxy resin.
I need to build the gear box, but I have a really good plan for that and anticipate it going pretty easy.
I need prop blades, but again I have the material and should be able to bang that out in a night.
My friend The Iron Goat will be building the flywheel (he can cast metal and turn things on his lathe) so I will need to collect that and then balance and install it.
I need a seat and some controls. I have some ideas on the seat, but the controls are still a mystery until I have the hull.
Same for the out-riggers, though I know what they are and what they are made of.
I need to build the hull, which will take three days, maybe less if I can get the Meers-Cat to lend a hand. So, all of this considered, I think I am more than a week away. I could easily take 14 days. That gives me a little less than two weeks to learn how to drive this thing.
That is a lot.
I will try to keep this blog updated. Don't take this personally, but I will be keeping it posted to keep myself going. I find that at the end of a day- after I have worked and then worked again on Fenrir- it is helpful to crystalize my thoughts in print. I am, of course, glad that people are watching the progress, but I am doing it for me. The story itself drives much of my action, so if I want this to be a story of triumph, I will need to keep on it.
Stick with me, friends, and I will make you all proud.
The target remains, the challenge is issued, and forward I go.
Subscribe to:
Posts (Atom)
